IMPORTANT CATALOG UPDATES (Since the release of the latest catalog)

• RI-K, CD-100-K — Rectagular and Round By-Pass Damper
  Submittal Sheet (Revision: 17, Drawing: L-9) updated on 01/13/2012
• RI-K — Control Damper #RI-K
  Submittal Sheet (Revision: 17, Drawing: J-9) updated on 01/13/2012
• FEMA-8 — 8" Deep FEMA Grille/Louver New Product!
  Submittal Sheet Internal Mount (Revision: , Drawing: ) updated on 10/20/2011
• B0-RH,BO-100H — Diffuser/Grille Balancing Bowden Cable System
  Submittal Sheet (Revision: 3, Drawing: E-14a) updated on 10/04/2011
• F/S-RD-I — Combination Fire/Smoke Damper
  Submittal Sheet (Revision: 5, Drawing: B-5) updated on 09/12/2011
• FD-R (FDD-R) — True Round Fire Damper - Dynamic or Static 1-1/2 Hour
  Submittal Sheet (Revision: 9, Drawing: A27) updated on 09/12/2011
• F/S-RD-II — Combination Fire/Smoke Damper
  Submittal Sheet (Revision: 4, Drawing: B-6) updated on 09/12/2011
• NAH-720-4 — Opposed Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 40" w.g.
  Submittal Sheet (Revision: 19, Drawing: C-25) updated on 08/24/2011
• NAH-721-4 — Parallel Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 40" w.g.
  Submittal Sheet (Revision: 19, Drawing: C-25) updated on 08/24/2011
• S-RD-II — Low Leakage Smoke Damper
  Submittal Sheet (Revision: 5, Drawing: C-6) updated on 08/12/2011
• S-RD-I — Low Leakage Smoke Damper
  Submittal Sheet (Revision: 4, Drawing: C-5) updated on 08/12/2011
• CD-100 — Opposed Blade, Control, Extr. Alum. up to 3" wg
  Submittal Sheet (Revision: 40, Drawing: A-1,2) updated on 08/09/2011
• AXF-12 — 12" Deep, Airfoil Blade, Formed Steel
  Submittal Sheet (Revision: 2, Drawing: A-36) updated on 07/29/2011
• XL-4 — 4" Deep, Formed Steel
  Submittal Sheet (Revision: 2, Drawing: A-40) updated on 07/20/2011
• CD-75/76 — Thinline Opposed/Parallel Blade Damper
  Submittal Sheet (Revision: 1, Drawing: A-2a) updated on 07/19/2011
• CD-161 — Parallel Blade, Control, AF Blade, Steel, up to 13" wg (Rollformed)
  Submittal Sheet (Revision: 18, Drawing: A-13) updated on 07/13/2011
• CD-160 — Opposed Blade, Control, AF Blade, Steel, up to 13" wg (Rollformed)
  Submittal Sheet (Revision: 18, Drawing: A-13) updated on 07/13/2011
• MD-106 — Parallel Blade, Balancing, Extr. Alum. up to 3" wg
  Submittal Sheet (Revision: 7, Drawing: A-25,26) updated on 07/12/2011
• MD-105 — Opposed Blade, Balancing, Extr. Alum. up to 3" wg
  Submittal Sheet (Revision: 7, Drawing: A-25,26) updated on 07/12/2011
• CD-101 — Parallel Blade, Control, Extr. Alum. up to 3" wg
  Submittal Sheet (Revision: 39, Drawing: A-1,2) updated on 07/12/2011
• FD-110-3V — Multi-Blade Fire Damper - 1-1/2 & 3 Hour - Static - 3V Blade - Optional Sleeve - Out of Wall or Round Option
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• M/S — Micro Switch Package
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• C/D-P — Square and Rectangular Ceiling Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• S-3V-I — Low Leakage Smoke Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• FD-160-AF — Multi-Blade Fire Damper - 1-1/2 & 3 Hour - Static - Airfoil Blade - Optional Sleeve - Out of Wall or Round Option
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• C-RD, C-RD-A — Ceiling Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• C/FS-2F, C/FSX-2F — Slimline Ceiling Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• S-3V-II — Low Leakage Smoke Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• FDD-110-3V — Multi-Blade Fire Damper - 1-1/2 & 3 Hour - Dynamic - 3V Blade - Optional Sleeve - Out of Wall or Round Option
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• C-RD-T, C-RD-A/T — Ceiling Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• C/FSR-1, C/FSR-2 — Square and Round Ceiling Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• S-AF-I — Low Leakage Smoke Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• FDD-160-AF — Multi-Blade Fire Damper - 1-1/2 & 3 Hour - Dynamic - Airfoil Blade - Optional Sleeve - Out of Wall or Round Option
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• C-S/R, C-S/R-A — Ceiling Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• CK-2000-1 — Thermal Blanket
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• S-AF-II — Low Leakage Smoke Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• FD-A-3V — Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Single Blade - Integral Sleeve
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• C/FS, C/FSB, C/FSX — Ceiling Damper
  O & M Instruction Sheet (Revision: , Drawing: ) updated on 06/27/2011
• C-S/R-HC, C-S/R-HC-A — Ceiling Damper
  Submittal Sheet (Revision: 4, Drawing: D-4) updated on 05/24/2011
• DCFL-D-4 — 4" Deep, Fixed Blade, Drainable, Extruded Aluminum
  Submittal Sheet (Revision: 11, Drawing: A-21) updated on 04/22/2011
• DCFL-D-6 — 6" Deep, Fixed Blade, Drainable, Extruded Aluminum
  Submittal Sheet (Revision: 11, Drawing: A-22) updated on 04/22/2011
• CD-120, 121 — Formed Steel Frame & 3v Blades, up to 12" w.g.
  Submittal Sheet (Revision: 7, Drawing: A-6) updated on 03/25/2011
• CD-170, 171 — Formed Steel Frame & Airfoil Blade Damper, Class I thru III
  Submittal Sheet (Revision: 7, Drawing: A-17) updated on 03/25/2011
• EL-D-4 — 4" Deep Fixed Drainable Aluminum louver
  Submittal Sheet (Revision: 3, Drawing: A-2a) updated on 03/01/2011
• MS-SP — Medium Security
  Submittal Sheet (Revision: 4, Drawing: K-8) updated on 02/28/2011
• MS-P-2 — Maximum Security
  Submittal Sheet (Revision: 3, Drawing: K-5) updated on 02/21/2011
• BB — Security Bars
  Submittal Sheet (Revision: 6, Drawing: K-1) updated on 02/21/2011
• MS-FB — Maximum Security
  Submittal Sheet (Revision: 3, Drawing: K-3) updated on 02/21/2011
• BB-S — Maximum Security Sleeved Barrier
  Submittal Sheet (Revision: 3, Drawing: K-2) updated on 02/21/2011
• MS-P-1 — Maximum Security
  Submittal Sheet (Revision: 3, Drawing: K-4) updated on 02/21/2011
• MS-P-4 — Maximum Security
  Submittal Sheet (Revision: 3, Drawing: K-7) updated on 02/21/2011
• MN-FB — Minimum Security
  Submittal Sheet (Revision: 2, Drawing: K-9) updated on 02/21/2011
• MS-P-3 — Maximum Security
  Submittal Sheet (Revision: 3, Drawing: K-6) updated on 02/21/2011
• LBD-4I — 4" Deep Aluminum Combination Louver/Backdraft Damper
  Submittal Sheet (Revision: 2, Drawing: A-34) updated on 02/11/2011
• LBD-4E — 4" Deep Aluminum Combination Louver/Backdraft Damper
  Submittal Sheet (Revision: 2, Drawing: A-34) updated on 02/11/2011
• ICBL-10, 20 — ICBL-10, 20 (Heavy Duty Blast Damper) AMCA Tested!
  Submittal Sheet (Revision: 24, Drawing: C-29) updated on 02/11/2011
• AH-621 — Parallel Blade, Heavy Duty, Flanged, Steel Frame, Aluminum Airfoil Blades, up to 13" w.g.
  Submittal Sheet (Revision: 13, Drawing: C-9) updated on 02/10/2011
• CD-151 — Parallel Blade, Control, AF Blade, Extr. Alum. up to 13" wg
  Submittal Sheet (Revision: 21, Drawing: A-9) updated on 02/09/2011
• CD-150 — Opposed Blade, Control, AF Blade, Extr. Alum. up to 13" wg
  Submittal Sheet (Revision: 21, Drawing: A-9) updated on 02/09/2011
• AH-620 — Opposed Blade, Heavy Duty, Flanged, Steel Frame, Aluminum Airfoil Blades, up to 13" w.g.
  Submittal Sheet (Revision: 13, Drawing: C-9) updated on 02/09/2011
• RI — Control Damper #RI
  Submittal Sheet (Revision: 26, Drawing: B-7) updated on 01/28/2011
• RD — Balancing Damper # RD
  Submittal Sheet (Revision: 19, Drawing: B-3) updated on 01/28/2011
• ICBL-R — Round Blast Damper
  Submittal Sheet (Revision: 5, Drawing: C-36,37) updated on 01/26/2011
• CH-10-R — Small Dampers with (spring return) Actuator
  Submittal Sheet (Revision: 19, Drawing: G-2) updated on 01/25/2011
• CH-10 — Small Dampers with (spring return) Actuator
  Submittal Sheet (Revision: 19, Drawing: G-2) updated on 01/25/2011
• WI-95 — Walk-In Plenum
  Submittal Sheet (Revision: 8, Drawing: J-3) updated on 01/19/2011
• SD-95 — Spiral Duct Access Door
  Submittal Sheet (Revision: 4, Drawing: J-2) updated on 01/19/2011
• UMES-3 — Metal Building Equipment Support
  Submittal Sheet (Revision: 5, Drawing: M-9) updated on 01/19/2011
• AAPN-10, AAPP-10 — Automatic Pressure Relief Door
  Submittal Sheet (Revision: 5, Drawing: J-4) updated on 01/19/2011
• UES-Pipe Roller — Conventional Pipe Roller Support
  Submittal Sheet (Revision: 4, Drawing: M-8) updated on 01/19/2011
• DPD — Drum Louver Drop Diffuser/Plenums
  Submittal Sheet (Revision: 9, Drawing: H-1) updated on 01/18/2011
• i-5,6 — Single Blade Sticktite Round Power/Balance™ Damper
  Submittal Sheet (Revision: 19, Drawing: E-3) updated on 01/18/2011
• LPD — Low Profile Drop Diffuser/Plenum
  Submittal Sheet (Revision: 8, Drawing: H-7) updated on 01/18/2011
• ICB-800 — Industrial Duty Rectangular Damper up to 8 1/2" w.g.
  Submittal Sheet (Revision: 18, Drawing: F-14) updated on 01/18/2011
• HCB-700 — Heavy Duty Rectangular Damper up to 4" w.g.
  Submittal Sheet (Revision: 26, Drawing: F-10) updated on 01/18/2011
• L-95, O-95 — Duct Access Door
  Submittal Sheet (Revision: 17, Drawing: J-1) updated on 01/18/2011
• ICB-950 — Industrial Duty Steel Airfoil Rectangular Damper
  up to 8 1/2" w.g.
  Submittal Sheet (Revision: 6, Drawing: F-21) updated on 01/18/2011
• DPD-6 — 6-Way Drop Diffuser/Plenum
  Submittal Sheet (Revision: 13, Drawing: H-4) updated on 01/18/2011
• HCB-750 — Heavy Duty Backdraft Damper
  Submittal Sheet (Revision: 8, Drawing: F-12) updated on 01/18/2011
• FFPD — Flat Face Drop Diffuser/Plenum
  Submittal Sheet (Revision: 10, Drawing: H-6) updated on 01/18/2011
• DPD-R — Rotating Plenum Diffuser
  Submittal Sheet (Revision: 4, Drawing: H-8) updated on 01/18/2011
• I-900 — Industrial Round Damper up to 10"w.g.
  Submittal Sheet (Revision: 19, Drawing: F-25) updated on 01/18/2011
• I-200-F/C — Weather Resistant Vertical Discharge BDD Cap
  Submittal Sheet (Revision: 16, Drawing: F-24) updated on 01/18/2011
• Hi-i-3 — High Efficiency Power/Balance™ Damper New Product!
  Submittal Sheet (Revision: 9, Drawing: E-4) updated on 01/18/2011
• AFPD — Angled Face Drop Diffuser/Plenum
  Submittal Sheet (Revision: 11, Drawing: H-5) updated on 01/18/2011
• RCD — Static Pressure Relief Damper
  Submittal Sheet (Revision: 16, Drawing: F-9) updated on 01/17/2011
• CD — Counter Balance Round Damper
  Submittal Sheet (Revision: 12, Drawing: F-8) updated on 01/17/2011
• System CRB-10 — Exhaust Constant Volume
  Submittal Sheet (Revision: 1, Drawing: L-3) updated on 01/17/2011
• CB-600 — Std Alum. Back Draft Damper, Vel. up to 1800 fpm, Extr. Frame, Formed Blade
  Submittal Sheet (Revision: 2, Drawing: F-1) updated on 01/17/2011
• R-650 — Retrofit Terminal-Round Ducts
  Submittal Sheet (Revision: 6, Drawing: L-7) updated on 01/17/2011
• CB-601 — Std Alum. Back Draft Damper, Vel. up to 2400 fpm, Extr. Frame, Formed Blade New Product!
  Submittal Sheet (Revision: 2, Drawing: F-3) updated on 01/17/2011
• CB-602 — Std Alum. Back Draft Damper, Vel. up to 4000 fpm, Extr. Frame, Extr. Blade New Product!
  Submittal Sheet (Revision: 2, Drawing: F-5) updated on 01/17/2011
• DW — Dual Wall Round Damper #DW
  Submittal Sheet (Revision: 8, Drawing: B-5) updated on 01/14/2011
• RD-WM — Balancing damper #RD-WM
  Submittal Sheet (Revision: 6, Drawing: B-4) updated on 01/14/2011
• 180 MPH — 180 MPH Enclosure
  Submittal Sheet (Revision: 9, Drawing: B-7) updated on 01/11/2011
• EB — Economy Damper
  Submittal Sheet (Revision: 9, Drawing: A-22) updated on 01/06/2011
• SB — Single Blade, Balancing Damper w/Quad
  Submittal Sheet (Revision: 12, Drawing: A-21) updated on 01/06/2011
• RI-F — Round Damper Flanged up to 6
  Submittal Sheet (Revision: 24, Drawing: D-1) updated on 01/05/2011
• Support Framing Systems — Blanket Insulation
  Submittal Sheet (Revision: 3, Drawing: M-37) updated on 01/05/2011
• UMB-5 — One Piece Curb with Integral Rib Closures - Use with R & SSR Panels
  Submittal Sheet (Revision: 6, Drawing: M-29) updated on 01/05/2011
• Support Framing Systems — Thermal Block Insulation
  Submittal Sheet (Revision: 2, Drawing: M-38) updated on 01/05/2011
• UMB-6 — Three Piece Curb with Integral Rib Closures on Plates - Use with R & SSR Panels
  Submittal Sheet (Revision: 4, Drawing: M-31) updated on 01/05/2011
• Jackshafting — Rectangular Industrial Dampers
  Submittal Sheet (Revision: 6, Drawing: C-38) updated on 01/05/2011
• Loose Rib Closures — Under/Over
  Submittal Sheet (Revision: 2, Drawing: M-39) updated on 01/05/2011
• UMB-7 — Two Piece Curb with Loose Rib Closures - Use with R & SSR Panels
  Submittal Sheet (Revision: 3, Drawing: M-33) updated on 01/05/2011
• Maintenance — Rectangular Industrial Dampers
  Submittal Sheet (Revision: 12, Drawing: C-39) updated on 01/05/2011
• Identification Guide — Unknown Metal Building Roof Panels
  Submittal Sheet (Revision: 4, Drawing: M-19) updated on 01/05/2011
• UMB-8 — Two Piece Curb with Integral Rib Closures - Use with R & SSR Panels
  Submittal Sheet (Revision: 4, Drawing: M-35) updated on 01/05/2011
• UES-3 — Self-Flashing
  Submittal Sheet (Revision: 4, Drawing: M-7) updated on 01/04/2011
• UMB-1 — One Piece Curb with Integral Rib Closures, Use with R & SSR panels
  Submittal Sheet (Revision: 6, Drawing: M-20) updated on 01/04/2011
• FCA-2 — Fan Curb Adapter
  Submittal Sheet (Revision: 6, Drawing: M-11) updated on 01/04/2011
• FCA-1 — Fan Curb Adapter
  Submittal Sheet (Revision: 6, Drawing: M-10) updated on 01/04/2011
• UCC-Vertical Pipe Curb — Conventional Roof Curb with Pipe Flashing
  Submittal Sheet (Revision: 4, Drawing: M-14) updated on 01/04/2011
• UMB-2 — One Piece Curb with Loose Rib Closures - Use with R & SSR panels
  Submittal Sheet (Revision: 5, Drawing: M-22) updated on 01/04/2011
• Insulated Curb Cover — Insulated Curb Cover
  Submittal Sheet (Revision: 3, Drawing: M-15) updated on 01/04/2011
• UMB-3 — One Piece Curb with flat flanges - Use with Vertical Architectural SSR Panels
  Submittal Sheet (Revision: 5, Drawing: M-25) updated on 01/04/2011
• HVAC Curb Adapter — HVAC Curb Adapter
  Submittal Sheet (Revision: 6, Drawing: M-12) updated on 01/04/2011
• UCC-Vented — Vented Conventional Roof Curb
  Submittal Sheet (Revision: 4, Drawing: M-13) updated on 01/04/2011
• Square to Round Cover — Square to Round Cover
  Submittal Sheet (Revision: 3, Drawing: M-16) updated on 01/04/2011
• UMB-4 — One Piece Curb with Integral Rib Closures (downhill side) - Use with R & SSR Panels
  Submittal Sheet (Revision: 5, Drawing: M-27) updated on 01/04/2011
• UES-2 — Integral Cant
  Submittal Sheet (Revision: 4, Drawing: M-6) updated on 01/04/2011
• UCC-5 — Self-Flashing, Non-Insulated Curb for Insulating in the field
  Submittal Sheet (Revision: 6, Drawing: M-4) updated on 12/23/2010
• R-680 — Retrofit Terminal-Rectangular Ducts
  Submittal Sheet (Revision: 18, Drawing: L-8) updated on 12/23/2010
• UCC-3 — Self-Flashing, Insulated Curb for Single Ply EPDM Roof
  Submittal Sheet (Revision: 6, Drawing: M-3) updated on 12/23/2010
• UCC-2 — Integral Cant, Insulated Curb for non-Insulated Roof Deck
  Submittal Sheet (Revision: 6, Drawing: M-2) updated on 12/23/2010
• UCC-1 — Raised Cant, Insulated Curb for Built-up Insulated Roof
  Submittal Sheet (Revision: 6, Drawing: M-1) updated on 12/23/2010
• UES-1 — Raised Cant
  Submittal Sheet (Revision: 5, Drawing: M-5) updated on 12/23/2010
• H-620 — Heavy Duty, Flanged, All Steel, up to 20" w.g.
  Submittal Sheet (Revision: 10, Drawing: C-5) updated on 12/22/2010
• ESMB — Diverting Room Bypass Terminal
  Submittal Sheet (Revision: 7, Drawing: L-6) updated on 12/22/2010
• FL-R — Flow Ring
  Submittal Sheet (Revision: 4, Drawing: L-5) updated on 12/21/2010
• H-420 — Heavy Duty, Flanged, All Steel, up to 10" w.g.
  Submittal Sheet (Revision: 38, Drawing: C-1) updated on 12/21/2010
• RI-FL — VAV Terminal-Round to Round
  Submittal Sheet (Revision: 19, Drawing: L-2) updated on 12/21/2010
• BMD-E — Heavy Duty Bellmouths
  Submittal Sheet (Revision: 0, Drawing: J-9) updated on 12/16/2010
• PRI-FL — VAV Terminal-Round to Rectangular
  Submittal Sheet (Revision: 25, Drawing: L-1) updated on 12/16/2010
• FVE — Block, Extruded Aluminum
  Submittal Sheet (Revision: 2, Drawing: A-43) updated on 12/13/2010
• FVF — Flanged, Extruded Aluminum
  Submittal Sheet (Revision: 2, Drawing: A-43) updated on 12/13/2010
• BMD, BM — Bellmouth Take-Offs
  Submittal Sheet (Revision: 0, Drawing: J-8) updated on 12/01/2010
• CO — Concentric-Supply/Return Units
  Submittal Sheet (Revision: 7, Drawing: H-9) updated on 12/01/2010
• PP-10, PN-10 — Manual Pressure Relief Door
  Submittal Sheet (Revision: 7, Drawing: J-5) updated on 11/15/2010
• ST-1,2,3,4 — Take-Offs
  Submittal Sheet (Revision: 12, Drawing: J-7) updated on 11/15/2010
• TR, DSC-L — Square to Round Transition
  Submittal Sheet (Revision: 17, Drawing: I-1) updated on 11/09/2010
• i-3 — Single Blade Round Power/Balance™ Damper
  Submittal Sheet (Revision: 30, Drawing: E-1) updated on 11/09/2010
• i-4 — Rectangular Power/Balance™ Damper
  Submittal Sheet (Revision: 22, Drawing: E-2) updated on 11/09/2010
• MI-MZ-1&2, OB-MZ-1&2 — Zone Control (Modulating) Damper
  Submittal Sheet (Revision: 13, Drawing: G-5) updated on 11/08/2010
• MI-MZ-1, OB-MZ-1 — Modulating Motorized Damper for Low Pressure Systems
  Submittal Sheet (Revision: 13, Drawing: G-5) updated on 11/08/2010
• Pak-10 — High Rise Energy Saving Damper New Product!
  Submittal Sheet (Revision: 7, Drawing: G-4) updated on 11/08/2010
• MI-A , OB-A — Small Motorized Dampers
  Submittal Sheet (Revision: 10, Drawing: G-1) updated on 11/08/2010
• P-N, P-L, P-EX — Plenums for Slot Diffusers
  Submittal Sheet (Revision: 16, Drawing: I-2) updated on 11/08/2010
• BO-BM, BO-ST — Sticktite Damper
  Submittal Sheet (Revision: 9, Drawing: E-8) updated on 11/05/2010
• BM-RC, ST-RC — Sticktite Damper
  Submittal Sheet (Revision: 5, Drawing: E-16) updated on 11/05/2010
• BO-RI — Round Single Blade Damper
  Submittal Sheet (Revision: 9, Drawing: E-7) updated on 11/05/2010
• BT-Hi — High Effeciency Balance Damper
  Submittal Sheet (Revision: 4, Drawing: E-17) updated on 11/05/2010
• CD-100 J-SR, RD-RR — Model CD-100 J-SR, RD-RR
  Submittal Sheet (Revision: 11, Drawing: E-23) updated on 11/05/2010
• BO-Hi — High Efficiency Balance Damper
  Submittal Sheet (Revision: 10, Drawing: E-9) updated on 11/05/2010
• CD-100-RC — Rectangular Damper and Controllers
  Submittal Sheet (Revision: 4, Drawing: E-18) updated on 11/05/2010
• CD-100-RP — CD-100-RP (Rectangular rod in duct operated)
  Submittal Sheet (Revision: 23, Drawing: E-24) updated on 11/05/2010
• BO-100 — Rectangular Damper and Controllers
  Submittal Sheet (Revision: 10, Drawing: E-10) updated on 11/05/2010
• RD-RC — Round Single Blade Damper
  Submittal Sheet (Revision: 6, Drawing: E-15) updated on 11/05/2010
• BF — Butterfly Spring Operated Round Damper
  Submittal Sheet (Revision: 15, Drawing: F-7) updated on 11/04/2010
• RI-F-O — Oval Damper Flanged up to 5
  Submittal Sheet (Revision: 17, Drawing: D-2) updated on 10/27/2010
• R-OB — Round Multi-Blade Damper
  Submittal Sheet (Revision: 2, Drawing: B-6) updated on 10/26/2010
• R-PB — Round Multi-Blade Damper
  Submittal Sheet (Revision: 2, Drawing: B-6) updated on 10/26/2010
• HD-492-ISO — Industrial Isolation Damper
  Submittal Sheet (Revision: 15, Drawing: D-15,16,17,18) updated on 10/20/2010
• OD-PS — Orifice Damper - Positive Sealed
  Submittal Sheet (Revision: 1, Drawing: D-21,22,23) updated on 10/19/2010
• OD — Orifice Damper
  Submittal Sheet (Revision: 2, Drawing: D-19,20) updated on 10/19/2010
• OD-SS — Orifice Damper, Stainless Steel
  Submittal Sheet (Revision: 2, Drawing: D-19,20) updated on 10/19/2010
• HD-392 — Level V Industrial Damper up to 10" w.g.
  Submittal Sheet (Revision: 16, Drawing: D-7,8,9,10) updated on 10/19/2010
• OD-M — Orifice Damper - Motorized
  Submittal Sheet (Revision: 1, Drawing: D-21,22,23) updated on 10/19/2010
• HD-492 — Level VI Industrial Damper up to 20" w.g.
  Submittal Sheet (Revision: 12, Drawing: D-11,12,13,14) updated on 10/19/2010
• HD-292 — Level IV Industrial Damper up to 5" w.g.
  Submittal Sheet (Revision: 17, Drawing: D-3,4,5,6) updated on 10/14/2010
• NAH-721-3 — Parallel Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 35" w.g.
  Submittal Sheet (Revision: 13, Drawing: C-21) updated on 10/10/2010
• NAH-721-1 — Parallel Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 20" w.g.
  Submittal Sheet (Revision: 11, Drawing: C-13) updated on 10/08/2010
• NAH-720-1 — Opposed Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 20" w.g.
  Submittal Sheet (Revision: 11, Drawing: C-13) updated on 10/08/2010
• NAH-721-2 — Parallel Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 30" w.g.
  Submittal Sheet (Revision: 19, Drawing: C-17) updated on 10/08/2010
• NAH-720-2 — Opposed Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 30" w.g.
  Submittal Sheet (Revision: 19, Drawing: C-17) updated on 10/08/2010
• NAH-720-3 — Opposed Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 35" w.g.
  Submittal Sheet (Revision: 13, Drawing: C-21) updated on 10/08/2010
• MD-116 — Parallel Blade, Balancing, 3V Blade, Steel, up to 4" wg (Rollformed)
  Submittal Sheet (Revision: 6, Drawing: A-23) updated on 09/28/2010
• MD-115 — Opposed Blade, Balancing, 3V Blade, Steel, up to 4" wg (Rollformed)
  Submittal Sheet (Revision: 6, Drawing: A-23) updated on 09/28/2010
• CD-111 — Parallel Blade, Control, 3V Blade, Steel, up to 4" wg (Rollformed)
  Submittal Sheet (Revision: 47, Drawing: A-3) updated on 08/24/2010
• CD-110 — Opposed Blade, Control, 3V Blade, Steel, up to 4" wg (Rollformed)
  Submittal Sheet (Revision: 47, Drawing: A-3) updated on 08/24/2010
• F/S-3V-CR-I — Corridor Damper
  F/S-3V-CR-I/II Installation Instructions (Revision: , Drawing: B-20) updated on 08/05/2010
• F/S-AF-OW-II — Combination Fire/Smoke Damper
  B-18 Out of Wall Installation Instructions (Revision: , Drawing: B-18) updated on 08/05/2010
• F/S-AF-I — Combination Fire/Smoke Damper with Sleeve
  B-21 Retaining Angles Installation Guide (Revision: , Drawing: B-21) updated on 08/05/2010
• F/S-3V-CR-II — Corridor Damper
  F/S-3V- CR-I/II Installation Instructions (Revision: , Drawing: B-20) updated on 08/05/2010
• F/S-3V-OW-I — Combination Fire/Smoke Damper
  B-18 Out of Wall Installation Instructions (Revision: , Drawing: B-18) updated on 08/05/2010
• F/S-AF-II — Combination Fire/Smoke Damper with Sleeve
  B-21 Retaining Angles Installation Guide (Revision: , Drawing: B-21) updated on 08/05/2010
• F/S-AF-FA-I — Combination Fire/Smoke Damper
  B-18 Out of Wall Installation Instructions (Revision: , Drawing: B-18) updated on 08/05/2010
• F/S-3V-OW-II — Combination Fire/Smoke Damper
  B-34 Motor Locations Installation Guide (Revision: , Drawing: B-34) updated on 08/05/2010
• F/S-3V-FA-I — Combination Fire/Smoke Damper
  B-18 Out of Wall Installation Instructions (Revision: , Drawing: B-18) updated on 08/05/2010
• F/S-AF-FA-II — Combination Fire/Smoke Damper
  B-18 Out of Wall Installation Instructions (Revision: , Drawing: B-18) updated on 08/05/2010
• F/S-3V-I — Combination Fire/Smoke Damper with Sleeve
  B-37 Smoke Detector Installation Instructions for SL-2000 Model (Revision: , Drawing: B-37) updated on 08/05/2010
• F/S-3V-FA-II — Combination Fire/Smoke Damper
  B-18 Out of Wall Installation Instructions (Revision: , Drawing: B-18) updated on 08/05/2010
• F/S-AF-OW-I — Combination Fire/Smoke Damper
  B-18 Out of Wall Installation Instructions (Revision: , Drawing: B-18) updated on 08/05/2010
• F/S-3V-II — Combination Fire/Smoke Damper with Sleeve
  B-31 Transitions Installation Guide (Revision: , Drawing: B-31) updated on 08/05/2010
• PRISM SERIES — 6-1/2" Airfoil Blade/Round Fascia Sunshade New Product!
  Submittal Sheet (Revision: 4, Drawing: C-3) updated on 07/26/2010
• SOLARIS SERIES — 6-1/2" Airfoil Blade/Tapered Outrigger Sunshade New Product!
  Submittal Sheet (Revision: 4, Drawing: C-4) updated on 07/26/2010
• SFL-6 — 6" Deep, Fixed "J" Blade, Formed Steel
  Submittal Sheet (Revision: 1, Drawing: A-15) updated on 07/26/2010
• CRIMSON SERIES — 6" Airfoil Blade, Monumental/Tapered Outrigger Sunshade New Product!
  Submittal Sheet (Revision: 4, Drawing: C-7) updated on 07/26/2010
• VINCI SERIES — Batten Blade Sunshade New Product!
  Submittal Sheet (Revision: 5, Drawing: C-12) updated on 07/26/2010
• APOLLO SERIES — 6-1/2" Airfoil Blade Sunshade New Product!
  Submittal Sheet (Revision: 4, Drawing: C-2) updated on 07/26/2010
• DESIGNER SERIES — Custom Designed Sunshades New Product!
  Submittal Sheet (Revision: 6, Drawing: C-21 thru 23) updated on 07/26/2010
• PRISM SCREEN — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: , Drawing: D-11) updated on 07/15/2010
• XAC-4 — 8" Deep, Formed Steel
  Submittal Sheet (Revision: 8, Drawing: A-38) updated on 06/26/2010
• ES-EL-2 — 2" Deep Aluminum Equipment Screen
  Submittal Sheet (Revision: 1, Drawing: A-49) updated on 06/26/2010
• ES-EL-6 — 6" Deep Aluminum Equipment Screen
  Submittal Sheet (Revision: 1, Drawing: A-51) updated on 06/20/2010
• ES-EL-4 — 4" Deep Aluminum Equipment Screen
  Submittal Sheet (Revision: 1, Drawing: A-50) updated on 06/20/2010
• ES-RD-4V — 4" Deep Aluminum Vertical Blade Equipment Screen
  Submittal Sheet (Revision: 1, Drawing: A-52) updated on 06/20/2010
• XAC-6, 9 — 12" Deep, Formed Steel
  Submittal Sheet (Revision: 1, Drawing: A-39) updated on 06/20/2010
• ELIPTICAL SCREEN — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: , Drawing: D-13) updated on 06/16/2010
• MES-TEX — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: , Drawing: D-12) updated on 06/15/2010
• BRAZILIAN I SERIES — 7-7/16" Horizontal Blade Sunshade
  Submittal Sheet (Revision: , Drawing: C-17) updated on 06/15/2010
• BRAZILIAN II SERIES — 7-7/16" Vertical Blade Sunshade
  Submittal Sheet (Revision: , Drawing: C-18) updated on 06/15/2010
• TRANTINA-TEX — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: , Drawing: D-10) updated on 06/14/2010
• FD-AOW — Curtain Fire Damper - 1-1/2 Hour - Static - Sleeved - Out of Wall
  Submittal Sheet (Revision: 4, Drawing: A-24) updated on 06/11/2010
• FDD-AOW — Curtain Fire Damper - 1-1/2 Hour - Dynamic - Sleeved - Out of Wall
  Submittal Sheet (Revision: 4, Drawing: A-25) updated on 06/11/2010
• VW-10 — Exhaust Cap
  Submittal Sheet (Revision: 2, Drawing: B-17) updated on 06/11/2010
• CFL-D-6 — 6" Deep, Drainable, Extruded Aluminum
  Submittal Sheet (Revision: 4, Drawing: A-33) updated on 06/10/2010
• CUBE LOUVER SCREEN — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: , Drawing: D-7) updated on 06/09/2010
• SLANT BLADE-TEX — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: , Drawing: D-6) updated on 06/09/2010
• OCT-TEX — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: , Drawing: D-8) updated on 06/08/2010
• LOUVER-BLOC II — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: 1, Drawing: D-3) updated on 06/07/2010
• AIRFOIL-BLOC SCREEN — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: 1, Drawing: D-4) updated on 06/07/2010
• DIAMOND-TEX SCREEN — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: 1, Drawing: D-9) updated on 06/07/2010
• LOUVER-TEX — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: , Drawing: D-5) updated on 06/07/2010
• PEL-4-SN — 4" Deep, "J" Blade, Drainable, Snow & Harsh Weather, Extruded Aluminum
  Submittal Sheet (Revision: 9, Drawing: B-9) updated on 06/06/2010
• EGG CRATE SCREEN — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: 2, Drawing: D-1) updated on 06/04/2010
• LOUVER-BLOC I — ARCHITECTURAL GRILLE
  Submittal Sheet (Revision: 1, Drawing: D-2) updated on 06/04/2010
• ES-CD-100V — 2-3/8" Deep Vertical Blade Aluminum Equipment Screen
  Submittal Sheet (Revision: 1, Drawing: A-48) updated on 06/02/2010
• EL-1-FL — EL-1-FL PTAC Grille With Flange Frame
  Submittal Sheet (Revision: 1, Drawing: A-45) updated on 05/27/2010
• CEL-D-4 — 4" Deep High Performance Combination Louver/Damper
  Submittal Sheet (Revision: 5, Drawing: A-31) updated on 05/27/2010
• SFL-4 — 4" Deep, Fixed "J" Blade, Formed Steel
  Submittal Sheet (Revision: 1, Drawing: A-14) updated on 05/20/2010
• SAFL-D-6 — Steel, Adjustable, Drainable 6" Deep Steel Louver
  Submittal Sheet (Revision: 1, Drawing: A-30) updated on 05/20/2010
• SAFL-6 — 6" Deep, Adjustable, "J" Blade, Formed Steel
  Submittal Sheet (Revision: 1, Drawing: A-28) updated on 05/20/2010
• RD-8 — 8" Deep, Fixed Vertical Blade, Drainable, Wind/Rain/Sand, Extruded Aluminum
  Submittal Sheet (Revision: 1, Drawing: A-17) updated on 05/20/2010
• SFL-2 — 2" Deep, Fixed "J" Blade, Formed Steel
  Submittal Sheet (Revision: 1, Drawing: A-13) updated on 05/20/2010
• VISTA SERIES — 6"x2" Batten Blade Sunshade New Product!
  Submittal Sheet (Revision: 3, Drawing: C-14) updated on 05/20/2010
• EL-1-CO — EL-1-CO PTAC GRILLE - CORE ONLY
  Submittal Sheet (Revision: 1, Drawing: A-44) updated on 05/20/2010
• BVE — Block, Extruded Aluminum
  Submittal Sheet (Revision: 1, Drawing: A-42) updated on 05/20/2010
• SOLARIUM SERIES — 4" Z-Blade/Tapered Outrigger Sunshade New Product!
  Submittal Sheet (Revision: 1, Drawing: C-10) updated on 05/20/2010
• SAFL-4 — 4" Deep, Adjustable, "J" Blade, Formed Steel
  Submittal Sheet (Revision: 1, Drawing: A-27) updated on 05/20/2010
• VV-10 — 6" Deep, Fixed Vertical Blade, Drainable, Wind/Rain, Extruded Aluminum
  Submittal Sheet (Revision: 5, Drawing: A-20) updated on 05/20/2010
• MODESTO SERIES — 6-1/2" Batten Blade/Perforated Side Panel Sunshade New Product!
  Submittal Sheet (Revision: 1, Drawing: C-15) updated on 05/20/2010
• SENTRY SERIES — 4" Airfoil Blade/Tapered Outrigger Sunshade New Product!
  Submittal Sheet (Revision: 3, Drawing: C-6) updated on 05/20/2010
• BVF — Flanged, Extruded Aluminum
  Submittal Sheet (Revision: 1, Drawing: A-42) updated on 05/20/2010
• SED-4 — 4" Deep, Fixed Blade, Drainable, Wind/Rain, Extruded Aluminum
  Submittal Sheet (Revision: 8, Drawing: A-18) updated on 05/20/2010
• SOL SERIES — 6-1/2" Batten Blade Sunshade New Product!
  Submittal Sheet (Revision: 4, Drawing: C-11) updated on 05/20/2010
• FL-D-6.1 — High Performance Fixed Louver 6" Deep New Product! AMCA Certified!
  Submittal Sheet (Revision: 2, Drawing: A-3) updated on 05/20/2010
• AFL-D-4 — 4" Deep, Adjustable Blade, Extruded Aluminum
  Submittal Sheet (Revision: 7, Drawing: A-25) updated on 05/20/2010
• VF-2 — 2" Deep, Fixed Chevron Blade, Extruded Aluminum
  Submittal Sheet (Revision: 1, Drawing: A-4) updated on 05/20/2010
• CAMANA SERIES — Perforated or Solid Skin Sunshade/Lightshelf New Product!
  Submittal Sheet (Revision: 1, Drawing: C-16) updated on 05/20/2010
• EL-1-FR — EL-1-FR PTAC Grille With Box Frame
  Submittal Sheet (Revision: 1, Drawing: A-46) updated on 05/20/2010
• RD-4 — 4" Deep, Fixed Vertical Blade, Drainable, Wind/Rain, Extruded Aluminium
  Submittal Sheet (Revision: 1, Drawing: A-16) updated on 05/20/2010
• SFL-D-6 — 6" Deep, Fixed Blade, Formed Steel, Drainable
  Submittal Sheet (Revision: 14, Drawing: A-12) updated on 05/20/2010
• SAFL-D-4 — Steel, Adjustable, Drainable 4" Deep Steel Louver
  Submittal Sheet (Revision: 1, Drawing: A-29) updated on 05/20/2010
• AXF-8 — 8" Deep, Airfoil Blade, Formed Steel
  Submittal Sheet (Revision: 1, Drawing: A-37) updated on 05/20/2010
• PARASOL SERIES — 4" Z-Blade Sunshade New Product!
  Submittal Sheet (Revision: 3, Drawing: C-8) updated on 05/20/2010
• CFL-D-4 — 4" Deep, Drainable, Extruded Aluminum
  Submittal Sheet (Revision: 1, Drawing: A-32) updated on 05/20/2010
• EL-1-GL — EL-1-GL PTAC Grille With Glazing Frame
  Submittal Sheet (Revision: 1, Drawing: a-47) updated on 05/20/2010
• SFL-D-2 — 2" Deep, Fixed Blade, Formed Steel, Drainable
  Submittal Sheet (Revision: 1, Drawing: A-10) updated on 05/20/2010
• ELON SERIES — 4" Batten Blade Sunshade New Product!
  Submittal Sheet (Revision: 3, Drawing: C-13) updated on 05/20/2010
• MARQUIS SERIES — 8", 10", & 12" Airfoil Blade Sunshade New Product!
  Submittal Sheet (Revision: 4, Drawing: C-5) updated on 05/19/2010
• —
  Submittal Sheet (Revision: 3, Drawing: C-1) updated on 05/18/2010
• STAR SERIES — 8" Airfoil Blade Sunshade New Product!
  Submittal Sheet (Revision: 3, Drawing: C-1) updated on 05/18/2010
• EL-2 — 2" Deep Fixed J/K Blade Louver
  Submittal Sheet (Revision: 2, Drawing: A-7) updated on 05/10/2010
• AFL-D-6 — 6" Deep, Adjustable Blade, Extruded Aluminum
  Submittal Sheet (Revision: 7, Drawing: A-26) updated on 05/10/2010
• PFL-D-4 — 4" Deep, Drainable, Extruded Aluminum
  Submittal Sheet (Revision: 12, Drawing: B-2) updated on 05/07/2010
• VV-10-D — 6" Deep, Vertical Fixed Blade, Drainable, Wind/Rain, Extruded Aluminum
  Submittal Sheet (Revision: 5, Drawing: A-24) updated on 05/01/2010
• FL-D-4 — 4" Deep, Fixed Blade, Drainable, Extruded Aluminum
  Submittal Sheet (Revision: 1, Drawing: A-2) updated on 04/20/2010
• DCSED-5.1 — 5" Deep, Fixed Horiz. Blade, Extruded Aluminum Wind-Driven Rain / Hurricane Louver
  Submittal Sheet (Revision: 7, Drawing: A-23) updated on 04/20/2010
• SFL-D-4 — 4" Deep, Fixed Blade, Formed Steel, Drainable AMCA Certified!
  Submittal Sheet (Revision: 8, Drawing: A-11) updated on 04/20/2010
• Mirror — Mirror Glass Louver
  Submittal Sheet (Revision: 1, Drawing: A-41) updated on 04/20/2010
• EL-6 — 6" Deep, Fixed Blade, Extruded Aluminum AMCA Certified!
  Submittal Sheet (Revision: 7, Drawing: A-9) updated on 04/20/2010
• SED-5.1 — 5" Deep, Fixed Blade, Drainable, Wind/Rain, Extruded Aluminum New Product! AMCA Certified!
  Submittal Sheet (Revision: 8, Drawing: A-19) updated on 04/20/2010
• D-DR-6 — 6" Deep, Fixed Blade, Double Drainable, Extruded Aluminum AMCA Certified!
  Submittal Sheet (Revision: 6, Drawing: A-6) updated on 04/10/2010
• EL-4 — 4" Deep, Fixed Blade, Extruded Aluminum
  Submittal Sheet (Revision: 4, Drawing: A-8) updated on 04/10/2010
• D-DR-4 — 4" Deep, Fixed Blade, Double Drainable, Extruded Aluminum AMCA Certified!
  Submittal Sheet (Revision: 2, Drawing: A-5) updated on 04/10/2010
• FL-ID-4 — 4" Deep, Intake/Discharge, Extruded Aluminum
  Submittal Sheet (Revision: 1, Drawing: A-35) updated on 04/01/2010
• BARCLAY SERIES — 4" Z-Blade/Radius Fascia Sunshade New Product!
  Submittal Sheet (Revision: 4, Drawing: C-9) updated on 03/20/2010
• FL-D-2 — 2" Deep, Fixed Blade, Drainable, Extruded Aluminum
  Submittal Sheet (Revision: 5, Drawing: A-1) updated on 02/20/2010
• FD-AUSL — Ultra Slimline Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Optional Sleeve
  Submittal Sheet (Revision: 5, Drawing: A-15) updated on 02/10/2010
• FDD-SC — Curtain Fire Damper - 1-1/2 & 3 Hour - Dynamic or Static - Integral Sleeve - Round, Oval, Rectangular & Low Profile Transitions Optional
  Submittal Sheet (Revision: 6, Drawing: A-6) updated on 02/10/2010
• FD-SAVG — Curtain Fire Damper - 1-1/2 & 3 Hour - Vertical Static - Sleeved - Behind Grille
  Submittal Sheet (Revision: 6, Drawing: A-20) updated on 02/10/2010
• FDD-B — Curtain Fire Damper - 1-1/2 & 3 Hour - Dynamic or Static - Optional Sleeve
  Submittal Sheet (Revision: 4, Drawing: A-11) updated on 02/10/2010
• FD-SB — Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Integral Sleeve
  Submittal Sheet (Revision: 5, Drawing: A-2) updated on 02/10/2010
• FDD-ASL — Slimline Curtain Fire Damper - 1-1/2 & 3 Hour - Dynamic or Static - Optional Sleeve - Out of Wall Option
  Submittal Sheet (Revision: 5, Drawing: A-16) updated on 02/10/2010
• FD-ALB — Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Optional Sleeve
  Submittal Sheet (Revision: 3, Drawing: A-7) updated on 02/10/2010
• FD-SAHG — Curtain Fire Damper - 1-1/2 & 3 Hour - Horizontal Static - Sleeved - Behind Grille
  Submittal Sheet (Revision: 5, Drawing: A-21) updated on 02/10/2010
• FDD-C — Curtain Fire Damper - 1-1/2 & 3 Hour - Dynamic or Static - Optional Sleeve - Round, Oval & Rectangular Transitions Optional
  Submittal Sheet (Revision: 5, Drawing: A-12) updated on 02/10/2010
• FD-SC — Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Integral Sleeve - Round, Oval, Rectangular & Low Profile Transitions Optional
  Submittal Sheet (Revision: 5, Drawing: A-3) updated on 02/10/2010
• FDD-BSL — Slimline Curtain Fire Damper - 1-1/2 & 3 Hour - Dynamic or Static - Optional Sleeve
  Submittal Sheet (Revision: 4, Drawing: A-17) updated on 02/10/2010
• FD-B — Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Optional Sleeve -
  Submittal Sheet (Revision: 4, Drawing: A-8) updated on 02/10/2010
• FDD-SAVG — Curtain Fire Damper - 1-1/2 & 3 Hour - Vertical Dynamic - Sleeved - Behind Grille
  Submittal Sheet (Revision: 4, Drawing: A-22) updated on 02/10/2010
• FD-ASL — Slimline Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Optional Sleeve - Out of Wall Option
  Submittal Sheet (Revision: 5, Drawing: A-13) updated on 02/10/2010
• FDD-SALB — Curtain Fire Damper - 1-1/2 & 3 Hour - Dynamic or Static - Integral Sleeve
  Submittal Sheet (Revision: 5, Drawing: A-4) updated on 02/10/2010
• FD-ACMH — Curtain Fire Damper - Caulk Sealed -1-1/2 & 3 Hour - Static up to 10" Static Pressure - Optional Sleeve - Round, Oval & Rectangular Transition Optional
  Submittal Sheet (Revision: 6, Drawing: A-18) updated on 02/10/2010
• FD-C — Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Optional Sleeve
  Submittal Sheet (Revision: 4, Drawing: A-9) updated on 02/10/2010
• FDD-SAHG — Curtain Fire Damper - 1-1/2 & 3 Hour - Horizontal Dynamic - Sleeved - Behind Grille
  Submittal Sheet (Revision: 4, Drawing: A-23) updated on 02/10/2010
• FD-BSL — Slimline Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Optional Sleeve
  Submittal Sheet (Revision: 4, Drawing: A-14) updated on 02/10/2010
• FDD-SB — Curtain Fire Damper - 1-1/2 & 3 Hour - Dynamic or Static - Integral Sleeve
  Submittal Sheet (Revision: 6, Drawing: A-5) updated on 02/10/2010
• FD-ACHP — Curtain Fire Damper - Welded - 1-1/2 & 3 Hour - Static up to 12" Static Pressure - Optional Sleeve - Round, Oval & Rectangular Transition Optional
  Submittal Sheet (Revision: 6, Drawing: A-19) updated on 02/10/2010
• FDD-ALB — Curtain Fire Damper - 1-1/2 & 3 Hour - Dynamic or Static - Optional Sleeve
  Submittal Sheet (Revision: 6, Drawing: A-10) updated on 02/10/2010
• FD-SALB — Curtain Fire Damper - 1-1/2 & 3 Hour - Static - Integral Sleeve
  Submittal Sheet (Revision: 5, Drawing: A-1) updated on 02/10/2010
• ICB-900 — Industrial Duty Airfoil Rectangular Damper up to 8 1/2" w.g.
  Submittal Sheet (Revision: 18, Drawing: F18) updated on 01/08/2010
• CD-100-ERC — Electric Remote Control Systems
  Submittal Sheet (Revision: 12, Drawing: D-24) updated on 10/28/2009
• RI-ERC — Round, Electric Remote Control, single blade damper
  Submittal Sheet (Revision: 12, Drawing: D-24) updated on 10/28/2009
• GEV — Exhaust Gravity Ventilator
  Submittal Sheet (Revision: 17, Drawing: F-6) updated on 08/31/2009
• GIV — Intake Gravity Ventilator
  Submittal Sheet (Revision: 17, Drawing: F-6) updated on 08/31/2009